Edge-Core ECS4610-24F Installationsanleitung Seite 39

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 92
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 38
C
HAPTER
2
| Network Planning
Application Notes
– 39 –
APPLICATION NOTES
1. Full-duplex operation only applies to point-to-point access (such as when a
switch is attached to a workstation, server or another switch). When the
switch is connected to a hub, both devices must operate in half-duplex
mode.
2. For network applications that require routing between dissimilar network
types, you can attach these switches directly to a multi-protocol router.
However, if you have to interconnect distinct VLANs or IP subnets, you can
take advantage of the wire-speed Layer 3 routing provided by these
switches.
3. As a general rule, the length of fiber optic cable for a single switched link
should not exceed:
1000BASE-SX: 550 m (1805 ft) for multimode fiber
1000BASE-LX: 5 km (3.1 miles) for single-mode fiber
1000BASE-LH: 70 km (43.5 miles) for single-mode fiber
10GBASE-SR: 300 m (984 ft) for multimode fiber
10GBASE-LR: 10 km (6.2 miles) for single-mode fiber
10GBASE-ER: 40 km (24.8 miles) for single-mode fiber
However, power budget constraints must also be considered when
calculating the maximum cable length for your specific environment.
Seitenansicht 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare